Zero Ultra Chainsaw Trousers
Clogger Zero Ultra, Men's Premium Chainsaw Trousers - Grey/Green
Clogger's most technically advanced trousers ever are also the most comfortable. Clogger has increased breathability with an Ultra Air-Flow design, featuring additional vents on the inner thigh to eliminate swamp-crotch, and using a highly breathable outer fabric to regulate the body's core temperature, keeping you in the performance zone longer.
Ultra Stretch delivers the greatest freedom of movement of any Zero trousers, with an improved 4-way stretch that works with the arborist in the trees and on the ground. Clogger's levelled up the durability with a new high tenacity ripstop nylon and supercharged Dyneema, and increased functionality with deeper pockets, an additional rear pocket, braces loops and velcro on the leg bottoms.
Finally, Clogger is introducing Ultra Connectivity. Every pair of Ultra trousers has a unique RFID identifier for asset management.
All changes come at no discernable additional weight, maintaining the Zero’s reputation as the original ultralight chainsaw trousers.
Chainsaw protection
- Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection.
- Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multidirectional strike performance.
- Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes.
Outer construction and design
- Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn - Nilit® is proven to reduce body temperature.
- 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give.
- High-tenacity nylon with a ripstop weave for a 1.5x stronger outer then the Gen2 Zero trousers.
- Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
- Ultra-high tear strength UHMWPE fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness.
- Elasticized waist for a snug fit and extra comfort.
- Lock stitched seams and reinforced stress points.
Tree people specific detail
- Tough, large cross flow mesh side vents for maximum cooling.
- 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness.
- Strong, durable zippers with a better seal to reduce the risk of sawdust damage.
- Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves.
- Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing.
- Wide belt loops to fit up to a 50mm belt.
- Mesh lining for enhanced breathability.
- Opening at hems to remove debris.
- High visibility panels front and rear.
Options
- Fit: Women’s or 360° Men's
- Size: 2XS - 2XL.
- Leg Length: Standard, Short, Tall.
WHY CLOGGER MADE THIS:
Designed for arborists who work in hot conditions, these pants are light and cool with a fit designed for a men's physique.
CERTIFICATIONS:
Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed).
FRONT AND 360 CALF PROTECTION, SHORT AND TALL LEG VARIANTS:
The Front and 360 Calf Protection, short and tall variants are made to order products which have an additional lead time of 1-2 weeks. Please contact us if you require this level of protection.
Designed and made in Invercargill, New Zealand
Clogger Zero Ultra Light and Cool
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
What you need
- Flexible tape measure
- Self-adhesive dots x 4
- Paper and pen
- An assistant
It is OK to measure over the top of clothes, e.g. shirt and trousers, providing they are not thick and heavy.
Stand straight and upright with your eyes looking directly ahead.
STEP 1: Get your assistant to find the top point of the hip bone on the side and place a sticky dot on this point. Do the same for the other side.
STEP 2: Place another sticky dot on the outside point of the hip bone level with the fullest part of the buttocks [refer to illustration]. Do the same for the other sides.
STEP 3: Get your assistant to pass the tape measure around and measure your girth at the level of the top sticky dots. Make sure you are measuring from the ‘zero/0’ end of the tape measure! This is your ‘top of hip’ measurement.
STEP 4: Repeat for the girth at the lower set of sticky dots. This is your ‘seat’ measurement.
STEP 5: Measure the distance between the upper and lower sticky dots. This is the ‘top of hip to seat’ measurement.
STEP 6: The fourth measurement is the outleg. While you are standing up straight, hold the ‘zero/0’ end of the tape on the upper sticky dot. Ask your assistant to read the tape at a point 2.5cm or 1 inch below the ankle bone.
STEP 7: Finally, we need the inleg. While standing straight and with feet slightly apart, hold the zero end of the tape at your crotch which is the point where your legs meet right at the top. Once again get your assistant to read the tape at a point 2.5cm or 1 inch below the ankle bone.
STEP 8 for custom chaps if top of hip circumference is greater than 140cm/55 inches: Starting from the crotch line at the centre front of the thigh, measure 15cm/6 inches down and mark this with a sticky dot. At the sticky dot measure around the full circumference of the thigh.
Record these measurements and compare with the sizing charts to see what size you should be ordering.